Boart Longyear

Boart Longyear LF™160 drilling rig debuts in Africa

The LF160 rig and Freedom Loader combination offers more control and oversight which means less interruption and a more efficient operation.

Boart Longyear’s TruScan™ technology recognized for Premier’s Award

Boart Longyear’s innovative onsite core and chip scanning technology—TruScan™—has been awarded the Premier’s Award in the Mining Equipment, Technology, and Services (METS) sector for Excellence in Innovation.

Boart Longyear sonic rig to make big waves at Groundwater Week in Vegas

Boart Longyear is planning an impressive presence at the show bringing its highly productive LS™250 sonic drill rig to be displayed in booth number 763. The company was the first U.S. firm to utilize sonic equipment for environmental drilling with this technology now being used in a wide variety of soft ground and shallow drilling applications. Sonic drilling is shown to be faster, with less than one percent drill deviation, and is more accurate than conventional overburden drilling. It also creates more efficient penetration, reducing waste up to 80% and resulting in maximum core recovery.

Complete line of Longyear™ Diamond Drilling Bits now available, cutting faster and lasting longer

Usually, a bit that cuts faster gets used up faster – which means more tripping to change the bit. The new Longyear bits seem to have the right balance. It’s important to select the right bit for the type of rock encountered. Longyear bits make that easier to do. I highly recommend the new Longyear bits – they have improved penetration rates, productivity and outlast any other bit I’ve used.

Quantifying drilling efficiencies – Why drilling metrics matter

Focus; safety performance, schedule, price, and quality core recovery.

Boart Longyear awarded GEMCO drilling contract in Australia

GEMCO is an open-cut mining operation, producing high-grade manganese ore that is shipped to GEMCO’s Tasmanian manganese alloy plant and around the world.

XQ™ wireline coring rods deliver longer life

After drilling through the entirety of 2017 and into 2018, the rods have achieved over 20,700 meters of drilling versus a typical life of approximately 12,000 meters on NRQ™ rods.

How running rig parts to failure affects the bottom line

The interdependence of drill rig maintenance, planning, and reliability.

Boart Longyear launches TruShot™ Digital Downhole Survey Technology

TruShot technology is used to precisely determine the azimuth and dip measurement of the borehole to understand exactly where the hole is located and from where the core is retrieved.

Boart Longyear launches new XQ™ Wireline Coring Rods

Already trialed at nearly 30 different exploration locations, with over 10,000 XQ rods tested, customers are excited about the benefits XQ rods bring to their drilling projects.

Boart Longyear moves to new headquarters

The move in May 2018, relocates the remaining administrative and corporate offices with the expectation that all of its 350 Utah-based employees and local entities will be housed under one roof by the end of June.

Boart Longyear Canada reaches 4.2 million man hours LTI-free

The Company has received both client and industry recognition this year for their great safety record in Canada. The crews at McArthur River reached 14 years LTI-free this year and the Saskatchewan Mining Association (SMA) recognized Boart Longyear with a Safety Achievement Award at the SMA Annual General Meeting Banquet and Awards held on March 2, 2018 in Saskatoon.

New drilling products displayed at Expomin will mean more productivity

Held every two years, Expomin will take place April 23-27, 2018 at the Espacio Riesco Convention Center in Santiago, Chile.

Boart Longyear adds new rigs to meet the demand of expanding exploration budgets

Company is adding new exploration drill rigs to its Drilling Services fleet around the world to meet the demand of expanding exploration budgets.

Innovation combined with trusted experience brings exciting new drilling products and services to PDAC 2018

With PDAC 2018 fast approaching, Boart Longyear—the world’s leading provider of drilling services, equipment and performance tooling—will make an impact on the exploration and mining community with several new product introductions to help customers drill better.

New line of Longyear™ diamond drilling bits cut faster and last longer

Boart Longyear announced the new line of Longyear™ diamond drilling bits with the release of the first bit in the line, the Longyear™ Green Bit.

Boart Longyear develops online store for easier ordering of drilling tools and parts

Boart Longyear, the leading provider of drilling services, drilling equipment and performance tooling, announced today My Drill Store, a new website for ordering drilling tools and parts online

Boart Longyear updates digital presence with new, robust website

"The new website is only the beginning."

Boart Longyear Drilling Services offers fully hands-free drilling with LF™90D to mining clients

To meet major mining’s increased safety requirements, Boart Longyear™ has engineered a fully hands-free drilling solution with its most popular surface coring rig – the LF™90D – in mining markets in North America, Africa and Asia.

Boart Longyear earns safety awards in Canada

Boart Longyear was recognized by the Canadian Diamond Drill Association (CDDA) with year-end safety achievement awards for working more than 100,000 hours in 2016 with a best in class incident frequency rate.

Boart Longyear Launches Core Orientation Tool, TruCore™ in Africa

SALT LAKE CITY, Utah — May 16, 2017 — Boart Longyear (www.BoartLongyear.com) is proud to launch the TruCore™ core orientation system in Africa, following successful launches in Australia and Latin America last year and Canada […]

Boart Longyear training program incorporates Company standards and global best practices

Boart Longyear recently launched its new global training program for drilling supervisors, drillers, driller assistants, mechanics, welders, manufacturing employees, and other front-line employees. The training is based on the Australian Resources and Infrastructure Industry training requirements, the United States Mine Safety and Health Administration standards and the Canadian Centre for Occupational Health and Safety standards, customized for Boart Longyear specific rigs, equipment and tooling.

Boart Longyear to present two technical sessions on geological data services and safety culture at Canadian Diamond Drilling Association’s 74th Annual General Meeting and Convention

Boart Longyear is a proud member of the Canadian Diamond Drilling Association (CDDA) and is excited to be presenting two technical sessions at the CDDA’s 74th Annual General Meeting and Convention in Ottawa, May 14-16, 2017.

Boart Longyear to demonstrate sonic drilling in geotechnical applications using the LSTM250 MiniSonicTM with a 4X6 system and SPT hammer

In partnership with the Buckeye Chapter of the National Drilling Association, Boart Longyear will conduct the demonstration at the Indoor/Outdoor Training Expo II at 5:00 p.m. on Thursday, May 18, 2017, in Newcomerstown, Ohio.

Creating value through the cycle: Boart Longyear to showcase Drilling Services at the 2017 SME Annual Conference & Expo and CMA 119th National Western Mining Conference

Boart Longyear is exhibiting in booth number 1317 at the 2017 SME Annual Conference and Expo and CMA 119th National Western Mining Conference, February 19-22, in Denver, Colorado.